Cable entry frame EMC / KEL-DS
För inledning och avskärmning av kablar med kontakt
IP55
Specification
IP Rating: | IP54, IP55 |
---|---|
Material: | Polyamide |
Flammability: | UL94-HB |
Temperature: | -40°C to +140°C |
Mounting options: | Screw mount |
Betyg: 5/5
Vill du veta mer?
Product description
The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface.
The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT).
The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.
A conductive flat gasket, which is included in the delivery, connects the cable entry frames to the conductive housing wall. This can be an advantage when the housing wall is not painted and therefore conductive.
Advantages of Cable entry frame EMC / KEL-DS
- Both conducted and field-bound disturbances can be reliably diverted
- Strain relief and sealing are separated from the EMC contact
- Scratch-resistant surface
- EMC grommets made entirely from conductive elastomer
- Very good dissipation values
- Very good shielding effect with regard to EMC tightness
Document
Download drawings
Tyvärr finns inga ritningar tillgängliga online för vald artikel.
Vänligen kontakta oss för mer information!
Configure
You might also like…
Related products
-
Cable entry plate multi-membrane / KEL-DP-Round
Passar metrisk håltagning M16 - M50
IP65 | UL Type 12 -
Brush Plate Split / KEL-BES-S
For cable pass-through
-
Cable entry plate multi-membrane / KEL-DPU
Robust, med stark dragavlastning
IP66/IP68 | UL Type 12/4X* -
Split cable gland / KVT
For cables with connectors
M20 - M63
IP54 | UL Typ 12