Emergency stop - With illuminated status indication active-inactive

Emergency stop– The operating principle of the system is simple and effective: If part of the plant is equipped with an emergency stop, for example a module in a production line, the emergency stop shows that it is active by lighting up red. This clear indication enables the operator to quickly identify which parts of the plant have activated the emergency stop and take appropriate measures.

When the module is disconnected from the production line, our emergency stop will become inactive and stop lighting. This clearly indicates to the operator that there is no urgent need to stop production or take any action.

The advantage of this system is that the risk of accidental activation of the inactive and unilluminated emergency stop is significantly reduced. By clearly showing whether an emergency stop is active or inactive, unnecessary stops in production and loss of valuable working time are avoided.

In addition, by quickly identifying which parts of the plant have activated the emergency stop, the operator can focus his efforts on the areas where measures are most needed. This increases efficiency and reduces the risk of damage to machines or products.

With this simple but effective function, the emergency stop system gives operators confidence and security in their working environment. They can be sure that they are in control of the facility and that they can act quickly and correctly when needed.

In summary, the emergency stop system is an important part of a safe and efficient production environment. By clearly indicating which parts of the plant have activated the emergency stop, it gives operators the information they need to act quickly and correctly, reducing the risk of damage and optimizing production.

Emergency stop - With illuminated status indication active-inactive

Visible safety, safer production with our emergency stop

Emergency stop - With illuminated status indication activeinactive_1
The illuminated emergency stops are available for cutouts ⌀16 mm and ⌀22 mm.
Nödstopp - Med belyst statusindikation aktivinaktiv_3

Eller plug & play med M12-anslutning i en kapsling med montageplatta.

Emergency stop - With illuminated status indication activeinactive_4

Det finns även varianter som är utrustade med en integrerad diagnosenhet som övervakar belysningsstatusen och säkerställer därmed att ett aktivt nödstopp kan uppfattas. Om det uppstår ett helt eller bara partiellt fel på belysningen, aktiveras nödstoppsignalen automatiskt och installationen försätts i säkert tillstånd.