icotek

Official icotek Partner in Sweden

Cable entry systems for cables with connectors

Kabelgenomföringssystem

Waterproof with up to IP66 seal

Using the patented grommet based icotek cable entry system, a large number of pre-terminated cables (up to 65 mm in diameter) and cables without connectors (up to 75 mm in diameter) can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / UL type 4X* rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable entry frames serve as strain reliefs on the cable (acc. to EN 62444). The split cable entry system enables quick and easy assembly which is great for retrofits and maintenance.

Cable glands for cables with connectors

Cable Glands

Waterproof with up to IP66 / IP68 seal

By using split cable glands by icotek pre-terminated cables with diameters from 1 to 35 mm can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / IP68 / UL Type 4X* rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable glands serve as strain reliefs on the cable. The split cable glands enable quick and easy assembly which is great for retrofits and maintenance.

Cable entry plates for cables without connectors

Kabelgenomföringsplattor

With the membrane-based feed-through plates, pneumatic and hydraulic hoses or optical fiber can be quickly and space-savingly routed to enclosures, panels or machines with certified protection class up to IP68 (according to EN 60529) and UL type 4X* (according to UL50-E). icotek's penetration plates are a cost-, space- and time-saving alternative to conventional cable glands.

IMAS-CONNECT™ Adapter grommets

IMAS-CONNECT™

Adapter grommets for Keystone jacks, PushPull connectivity and circular connectors

IMAS-CONNECT™ by icotek is a modular designed grommet system for mounting circular connectors, Keystone jacks, PushPull connectors, hose fittings, pressure compensation elements and much more. By utilising the modular adapter system, the split icotek cable entry frame becomes a hybrid system.

EMC Cable entry systems

EMC-kabelgenomföringssystem

Solutions for conducted and field-bound disturbances

In case of conducted as well as field bound EMI disturbances, our split cable entry system EMC-KEL-DS and our split cable gland EMC-KVT-DS offer an effective way to divert and block those disturbances and provides an alternative to conventional EMC cable glands — especially when routing cables with connectors.

Kabelgenomföringssystem för livsmedelsindustrin

Kabelgenomföringsplattor

Hygienic, FDA compliant, sealing with up to IP66 / IP68

With the membrane based hygienic cable entry plates, unterminated cables or pneumatic hoses can be quickly and space-efficiently routed into control cabinets, panels and machines and can be sealed with certified protection classes up to IP66 / IP68 (acc. to EN 60529). Hygienic icotek cable entry plates are cost, space and time saving alternatives to hygienic stainless steel cable glands.

Cable entries with brush seal

Borsttätning

Brush plates and brush strips for enclosures, server racks and machines

icotek erbjuder kabelgenomföringar med borsttätning som borstplattor och borstlister som passar perfekt vid applikationer där ingen hög IP-klass krävs. icoteks borstlösningar är avsedda för damm och smutsbeständiga applikationer oavsett om kabeln är kontakterad eller ej.

EMC Cable shield clamps

EMC Cable shield clamps

EMI shielding & earthing components

For process measurement and control equipment an increasingly higher level of protection against failure is required. EMI shielding and earthing is very important. The area where the cable shield is connected to the cabinet earth is a critical point. It is very important that the connection has a low resistance. All icotek EMC cable clamps for shielding cable diameters from 1.5 to 75 mm have been tested utilising various frequency ranges and in all tests there was minimal leakage resistance.

Cable management

Cable management

Hook-and-loop cable ties & velcro tape holders

Cable ties with hook-and-loop fasteners are an increasingly common fixing mode for cables. They are used instead of standard cable ties, because they can be easily closed and opened several times. The soft material is gentle on cables, especially where vibrations are present. icotek also offers velcro tape holders, which can be mounted quickly and easily in various ways.

Icotek- Innovativ pionjär inom smart kabelhantering, har sedan 20 år framgångsrikt utvecklat innovativa system för kabelgenomföring och EMC-kabelskärmning

Globalt ledande företag från olika sektorer förlitar sig på icoteks kunnande och deras innovativa styrka. Många patent och certifieringar är både ett incitament och en ambition för företaget.

Icotek's product range consists of the following groups:

Kabelgenomföringsramar för kablar med kontakt, Kabelförskruvningar för kablar med kontakt, IMAS-CONNECT™ adapterinsatser, EMC kabelgenomföringsystem, Kabelgenomföringsystem för livsmedelsindustrin, Kabelgenomföringsystem för renrum och Kabelgenomföringssystem för järnvägsindustri.

Read more at: icotek